How To Make Your Own Custom-Length Baby Gate

January 11, 2011 in Making our House a Home, Mom 2 Mom

This post has been featured!

UndertheTableandDreaming

-:-

Throughout December, I shared several photos of our home all decked out for Christmas. Much of today will be spent taking down and packing up Christmas decor to await next year’s holiday season…but there were a few changes we made to our home that are here to stay.

One of these changes was the dismantling of our home-made baby gate. This change was motivated by the number of Christmas parties we hosted, the fact that Josiah had started to play with and slam shut the door all the time (so the hinges had become progressively looser), and that we haven’t used the gate for its intended purpose of gating in the little one for several months now (if not a year). I also have been tossing around the idea of moving our dining room table into the kitchen area so that the table top can help solve our lack of counter space problem…and I could then convert what is currently our dining room/office into a playroom/office. Not sure if we are still going to give that a try…but if we do decide to, the baby gate would have been a problem.

So, long story short, the baby gate is gone. The opening feels huge!

I thought I’d take the time to share a bit about it in case any of you have large openings for which you’d like to make your own custom baby gate…

Our opening was about 8 feet. The cheapest manufactured baby gate we could find for a space this large would have cost us around $200, and were made of cheap plastic and mesh fabric. I thought they looked tacky and cost too much. So we made our own out of wood, pvc pipe, and stray paint for under $50 (almost half of which was spent on a nice rounded piece of wood for the top…using a square dowel would have made it even cheaper!)

I don’t have any pictures of the process…sorry! But here is how we did it:

1. First I had to convince my husband that this would work, and that we should do it (he wasn’t so sure)…I drew up some plans on graph paper, completely to scale. He still wasn’t convinced that pvc pipe would be sturdy enough, or that we’d be able to anchor it into the floor well enough to keep it standing up straight. But he loves me, so he agreed to give it a shot. Even if you don’t have to draw up plans to sell the idea, I think it was very helpful to get all the measurements down so we knew how far to space the pipes.

2. We headed out to gather up the necessary materials: pvc pipes, square dowels, a wooden railing for the top, gorilla glue, spray paint, 2 small hinges, and 1 sliding lock.

3.We cut the pvc pipe and wood pieces to our desired lengths. Since your gate probably won’t be the exact same size and/or you’ll want to door in a different place, I don’t think there is much value in giving you the exact dimensions of ours. Plus that would require me getting the tape measure and going out to the garage where the gate is now stored. But if you are wondering about height, we made ours 32 inches tall and it seemed just right. When measuring your length, be sure to add in some extra width so that the door can swing open. I think we made the door about 3/8 of an inch smaller than the opening we left for it, and that did the trick.

4. We borrowed a drill press from a neighbor and drilled nice big even holes in the wood pieces slightly larger than the diameter of the pipes. The drill press was amazingly helpful, and if you have access to one, use it! If you don’t you’ll just have to be pretty precise about making sure to keep you drill nice and perpendicular to the wood so that all the pipes line up right.

5. Then we glued the pipes into the holes in the wood and clamped them together to dry. Not gonna lie, this was a challenge, and was definitely a two person job. It was tough to get all the pipes lined up with their respective holes at the same time and get them squeezed into place before the glue dried.

A note about glue: On our first attempt we use gorilla wood glue. We painted it all up, but didn’t even get it inside and up before we realized that that wasn’t going to work…it didn’t stick to the PVC pipe. So we reglued everything using original gorilla glue. That worked. (I wish we would have known that the first time, because we had to redo all of our painting after regluing…so don’t make the same mistake we did…you want to use original gorilla glue to attach PVC to wood). We would also recommend taking a rough grit sand paper to the edges of the pvc pipe to rough them up so the glue adheres better.

6. Once the glue was dry, we painted it all black. I think we used 3-4 cans of spray paint the first time (and another 1-2 when we had to reglue) although I don’t really remember for sure. I wanted it to match the steely grey/black metal coffee table/end tables set that we have in our living room. They have kind of a finish somewhere between matte and satin, but the cheap spray paint only came in flat or glossy. So we used the cheap flat black spray paint and then did a top coat in with a clear satin spray paint. If I remember correctly, it only took one can of the clear.

7. We installed the sides of the gate by drilling with a masonry bit into our kitchen tile, and screwing it into the wall on both sides and at four places along the floor.

8. We attached to door with small black hinges and used a sliding lock as the latch.

Ta Da! A custom made baby gate for under $50…And I thought it was actually quite handsome as baby gates go.

-:-

 

Linked up to:

Look What I Made! @ Creations by Kara

Funky Junk Interiors

UndertheTableandDreaming
Tip Junkie handmade projects



Creations by Kara

Somewhat Simple

Join  us Saturdays at tatertotsandjello.com for the weekend wrap   up           party!

Frugal Friday @ www.LifeasMOM.com

How To Make Your Own Custom-Length Baby Gate

20 Comments

    1. Oh, I wish I woulda had this tut when my boys were younger! These days they’d just laugh at me. haha… It looks great! Good job!

    2. Jill says:

      Wow, great job! I need to make one of those for when we visit my mom’s house. It turned out so nice it actually looks like decoration rather than necessity, lol. Thanks for joining the party!

      Jill

    3. I LOVE this! Come on ova’ and link up to WHASSUP!!! xoxokara

      *ENTER LINKY PAR-TAY Here! *

    4. Wow what an impressive gate – looks fantastic! Thanks so much for linking up to the Sunday Showcase Party – I greatly appreciate it. I have featured this today.
      Hope you are enjoying your week
      ~ Stephanie Lynn
      http://www.bystephanielynn.com

    5. Mynnette says:

      Fabulous! We’ve got a large opening and have been trying to figure out how to block it off–thank you, thank you! :) Pinning this for future reference!!!

    6. Ginger says:

      Featuring YOU today! Thank you so much for linking up to {wow me} wednesday last week.

      Ginger @ gingersnapcrafts.com

      http://www.gingersnapcrafts.com/2012/01/take-look-at-you-my-favorites_19.html

    7. Babygirldaddy says:

      [IMG]http://i1215.photobucket.com/albums/cc518/semperfidelis354/79DC97CC-03A6-493A-B2DC-B70FF0DF9876-10946-000012057339FD16.jpg[/IMG]

      Not sure if that posted but I found your tutorial online when my girl started crawling. My wife and I are so grateful to have saved so muh money! So thanks a lot!

    8. Cassie says:

      Wow! Great job- it looks great and this is such a do-able thing to make. Thanks for the inspiration.

    9. how did you repair the holds you drilled in the tile floor.I love this gate but don’t want to runin my tile floor. Thanks Ron

    10. how did you repair the holds you drilled in the tile floor.I love this gate but don’t want to runin my tile floor. Thanks Ron

    11. Crystal says:

      I love this. I actually only need to buy the spray paint plus some pvc pipes. I am a mom of three (one teenager and two that are now two and 6 months) but I am also a breeder and I love my Saints but sometimes they need to be locked up in the kitchen. I am building one for my kitchen, we have an open floor plan and I worry about my little ones getting burnt when I am cooking, but I could never find a baby gate for that size, this is much more stable than those gate doors anyway. I am going to spend $15-20 on mine (mostly in paint) Thanks for the idea!

    12. Alisha says:

      Ron –
      We were not concerned about holes in our tile. I don’t really have any other suggestions for you if you have a large opening. If your opening is small, though, you could probably get away with attaching it only to the walls.

      Alisha

    13. Pinning this as an idea for our stairs

    14. Patt Butti says:

      Great idea on the pvc gate….very clever.
      I did notice you have a diffenbachia (?) plant
      are you aware they are poisenous? if a baby got to the leaves and chewed them, could be a problem…just heads up

    15. Tiffany says:

      There is a 10ft opening in the family room of our new house that I was trying to figure out how to block off…and ta-da I come across this! I think this will work great.
      Thanks.

    16. Amanda says:

      About how much did you spend on this

    17. Erica says:

      What size PVC did you use? Also, what size/type of wood did you use? My husband and I are thinking about using this tutorial for a doggy gate that will also act as a baby gate once we start a family. Thanks!!!

    18. Rob says:

      My wife sent me this via Pinterest. As I’m reading, I’m calling major BS!

      The pipe alone was $28.40

      1/2″x10′ PVC pipe at $3.55 from Home Depot will yield 3 of your 32″ pieces. From your photo I count 24 (but there for sure is more) so you would need 8 sticks of $3.55 pipe for this.

      Decent spray paint that won’t flake off and end up in the baby’s mouth is $4-$5 a can.

      The lock you used is another $6-$7.

      How much where the anchors used to secure it to the floor?

      And how much was that wood rail again?

      I think it would have been cheaper to just buy the $200.00 one.

    19. Alisha says:

      Thanks for the warning Patt, I did not know that. My plants are fake, though, so I was never worried :)

    20. Mike says:

      Beautiful and inventive! Do you remember if the baby gate was strong enough to be used a dog gate? We have some dogs that do a pretty good job of trying to knock down the small opening, between-two-walls gates that we have.

Leave a Reply

How To Make Your Own Custom-Length Baby Gate

0 Trackbacks